SRC XR8-2 AEG Airsoft Rifle Owner's Manual

SRC XR8-2 AEG Airsoft Rifle

Description
Built Material: Full Metal with ABS Grip & Stock
Length: 790mm (31 inches) - 860mm (34 inches)
Weight: 3,45 g (7.45 lbs)
Hop UP: Adjustable
Magazine capacity: 300 rounds
The Gearbox: Ver 3
Hopup: Adjustable
Shooting Mode Semi, Auto
Battery: Mini Type
Package: AEG, Two Magazines, Three Adjustable Aluminium Scope, Manual
Model: GE-0621
Battery and charger are not included
Velocity: 330

SRC XR8-2 AEG Component Names
SRC XR8-2 AEG Selector Switch/Safety Settings
SRC XR8-2 AEG Inserting Battery
SRC XR8-2 AEG How to Use Magazine
SRC XR8-2 AEG Hop Up Adjustment
SRC XR8-2 AEG Setting the Sight

SRC XR8-2 AEG the 6 Position Stock
SRC XR8-2 AEG Maintenance and Removing Clogged BB's
SRC XR8-2 AEG Troubleshooting
SRC XR8-2 AEG Airsoft Rifle Warning

SRC XR8-2 AEG Component Names


back to top

SRC XR8-2 AEG Selector Switch/Safety Settings


*Safety Setting The trigger cannot be pulled	*SEMI Automatic (single shot)
	Warning Pulling the trigger with the selector switch being set to safe may cause damage! Warning Never operate the selector switch while pulling the trigger! It may caust danger!
*Full Automatic
back to top

SRC XR8-2 AEG Inserting Battery


1. Remove the handguard lock pin. Open the lower handguard.	2. Place battery into lower handguard, and conect the battery connector.

3. Replace lower handguard, and reinsert lock pin.
back to top

SRC XR8-2 AEG How to Use Magazine


1. Open the hatch at the top of the magazine and insert BBs. The magazine can hold about 470 rounds.	2. Turn the gear at the bottom. Stop turning when the magazine starts to click, differently.

3. The 2 Magazines can be connected together, or left seperate.	4. Replace the magazine into the gun, until a "Click" is heard. It is now ready for Firing.

To remove the magazine, press the magazine release button.
back to top

SRC XR8-2 AEG Hop Up Adjustment


*Adjustable Hop Up System	Warning- Because a precision tight bore barrel is installed. Using diry or recycled BBs will cause a jam and damage the gearbox. Do not Recycle BBs!

SRC XR8-2 AEG Setting the Sight



back to top

SRC XR8-2 AEG the 6 Position Stock


back to top

SRC XR8-2 AEG Maintenance and Removing Clogged BB's

1. Drop a few drops of silicone oil into BB entrance. Insert BB;s into the magazine and fire equivalent of 1 or 2 magazines.

back to top

SRC XR8-2 AEG Troubleshooting

Symptom	Causes	Action
No action	Selector lever set to SAFE	Set the selector lever to AUTO or SEMI
	Battery is not charged	Charge the battery
	Battery conector is disconnected	Connect the connector
	Expired motor life (50,000)	Replace the motor
	FUSE is blown out	Replace the FUSE
Motor	Faulty Gear	Purchase the replacement gear from the dealer
	Bullets are clogged in the chamber	Using the cleaning rod to remove the bullet
	Bullets are clogged in the chamber	Shake the magazine
Malfunction-Semi	Deviation in gear timing	Set to SEMI after firing 2-3 sec in Full AUTO
Malfunction-Semi	Faulty gear lever	Purchase the replacement parts from the dealer
Malfunction-Full	Deviation in gear timing	Set to SAFE first then set to Full auto again
Malfunction-Full	Faulty gear lever	Purchase the replacement parts from the dealer
Firing	Insufficient battery power	Charge the battery
Shooting
	HOP UP system doesn't work	Adjust HOP UP
	Faulty BB bullets	Please use only high quality precision BB's
Loud
back to top

SRC XR8-2 AEG Airsoft Rifle Warning

This product is an airsoft airgun, it is to be purchased by person(s) age eighteen (18) years or older. Adult / parental supervision is required when used by any person under age of eighteen.

Be responsible, check with your local law enforcement on airsoft airgun regulations.

Please read the operation manual and fully understand the safe handling of your airsoft airgun before use.

Pay special attention to your surrounding when using your airsoft airgun. Do not carry your airsoft airgun in public, in open view or concealled. Transport your airsoft airgun unloaded, in locked gun carrier / case. Do not brandish, point, or shoot at other people, animal, or private properties. Such actions may be preceived by others (including law enforcement officer) as a threat and prompt to react accordingly.

U.S. federal regulation requires the orange marking, do not remove, alter or impair marking. All warranty void if markings(s) are tempered. This airsoft airgun is for safety & handling training purpose, movie and theatrical production application, regulated airsoft sport at participating playing field and shooting range. Ask your airsoft dealer for details.

Store your airsoft airgun unloaded, remove batteries, discharged of any gas or spring tension. In a safe and locked location; out of the reach of children.